異材接合法DSWで作製した鋼/アルミニウム合金接合体の疲労特性
Fatigue Properties of Steel-aluminum Alloy Joint Fabricated by Dissimilar Joining Method DSW
- 提供方法
- 他サイトにて提供・販売
- 入手方法の確認はこちら
- 文献番号
- 20214595
- 文献・情報種別
- 自動車技術会論文集
Vol.52 No.4
- 掲載ページ
- 899-904(Total 6 p)
- 発行年月
- 2021年 7月
- 出版社
- (公社)自動車技術会
- 言語
- 日本語
書誌事項
カテゴリ | 研究論文 |
---|---|
カテゴリ(英) | ResearchPaper 翻訳 |
著者 | 1) 中村 文則, 2) 阪口 基己, 3) 橋村 徹 |
著者(英) | 1) Fuminori Nakamura, 2) Motoki Sakaguchi, 3) Toru Hashimura |
勤務先 | 1) 東京工業大学, 2) 東京工業大学, 3) 神戸製鋼所 |
抄録 | 自動車車体のマルチマテリアル化のために開発された異材接合法DSWにより作製した鋼/アルミニウム合金異材接合体に対し,室温での引張せん断試験と疲労試験を行った.その結果,DSW接合体はSPR接合と同等以上の強度を持つこと,DSW接合体の疲労破壊にはフレッティング損傷が影響を与えることが明らかになった. |
抄録(英) | Tensile shear tests and fatigue tests were performed for dissimilar joints of steels and aluminum alloys fabricated by Dimple Spot Welding (DSW), which is a novel method for dissimilar metal joining. In the tensile shear tests, two failure modes of DSW joints were observed, and the tensile shear strength was affected by the strength of base metals. In fatigue tests, failure mode was fretting fatigue, and the fatigue life was not simply determined by the strength of base metals. The both tensile shear strength and fatigue strength were higher in the DSW joint compared with the Self-Pierce Riveting joint. 翻訳 |