Shock & Jerk Analysis for Powertrain Mounting Optimization using Multi Body Models
- 提供方法
- 本サイト上にてダウンロード・閲覧可
- 形態
- 価格
- 一般価格(税込):¥1,100 会員価格(税込):¥880
- 文献番号
- 20055474
- 文献・情報種別
- 学術講演会予稿集(春)
No.73-05
- 掲載ページ
- 1-6(Total 6 p)
- 発行年月
- 2005年 5月
- 出版社
- (公社)自動車技術会
- 言語
- 英語
書誌事項
| 著者(英) | 1) Rabah Hadjit, 2) Joris Van Herbruggen, 3) Kazuhide Togai, 4) Tadashi Takeuchi |
|---|---|
| 勤務先(英) | 1) LMS International, 2) LMS International, 3) Mitsubishi Motors, 4) Mitsubishi Motors |
| 抄録(英) | Physical properties of sprayed polyurethane skin for instrument panel were investigated. Optimized sprayed PU(polyurethane) composition for instrument panel was determined by reaction speed measurement, which were polyol of 6000 molecular weight and modified MDI (NCO=25%). For making sprayed PU skin, raw material was sprayed from 15 cm of distance, at 15 g/min of spraying rate, on 70℃ of mold, with 75℃ of raw material. Sprayed PU skin had lower density than PVC skin when investigating cross sections of skins using scanning electron microscope (SEM). But the reliability test results satisfied all the specification requirements like scratch, chemical resistance, contamination resistance and fogging. Tensile strength, hardness and elongation of sprayed PU skin were slightly changed during heat aging, but the changing rate was much smaller than those of PVC skin. 翻訳 |