Please log in

Paper / Information search system

日本語

ENGLISH

Help

Please log in

  • Summary & Details

Track-Based Aerodynamic Testing of a Two-Truck Platoon

Detailed Information

Author(E)1) Brian McAuliffe, 2) Patrick Smith, 3) Arash Raeesi, 4) Mark Hoffman, 5) David M. Bevly
Affiliation(E)1) National Research Council Canada, 2) Auburn University, 3) National Research Council Canada, 4) Auburn University, 5) Auburn University
Abstract(E)Fuel savings from truck platooning are generally attributed to an aerodynamic drag-reduction phenomena associated with close-proximity driving. The current paper is the third in a series of papers documenting track testing of a two-truck platoon with a Cooperative Adaptive Cruise Control (CACC) system where fuel savings and aerodynamics measurements were performed simultaneously. Constant-speed road-load measurements from instrumented driveshafts and on-board wind anemometry were combined with vehicle measurements to calculate the aerodynamic drag-area of the vehicles.
The drag-area results are presented for each vehicle in the two-truck platoon, and the corresponding drag-area reductions are shown for a variety of conditions: gap separation distances (9 m to 87 m), lateral offsets (up to 1.3 m), dry-van and flatbed trailers, and in the presence of surrounding traffic. For the standard aligned platoon, the results demonstrate up to 8% drag reduction for the lead vehicle, with drag reductions exceeding 20% for the trailing vehicle at some yaw angles. Wind-velocity measurements on the following truck suggest that the drag-area reductions are due to a combined effect of reduced apparent wind speed and reduced effective yaw angle in the wake of the lead truck. In the presence of a three-vehicle traffic pattern forward of a single truck, drag-area reductions on the order of 10% were observed relative to the same truck travelling in isolation. When platooning with this surrounding-traffic pattern, the trends and magnitudes of aerodynamic drag reduction are shown to be retained, relative to the platoon in the absence of other traffic, corroborating observed trends in of fuel-savings performed simultaneously.
As a supplement to the current study, a first-of-its-kind coast-down test was undertaken with the two-truck platoon where the CACC system was used to maintain a constant distance between the vehicles during each coast. The CACC system was used on the following vehicle when the lead vehicle was coasting and on the lead vehicle when the follower was coasting. Despite some scatter in the data from this proof-of-concept study, the results are consistent with those of the principal constant-speed measurement technique of this paper. This preliminary study demonstrates that the coast-down test method, which previously was only applied for single vehicles, is also applicable to vehicle platoons.

About search

close

How to use the search box

You can enter up to 5 search conditions. The number of search boxes can be increased or decreased with the "+" and "-" buttons on the right.
If you enter multiple words separated by spaces in one search box, the data that "contains all" of the entered words will be searched (AND search).
Example) X (space) Y → "X and Y (including)"

How to use "AND" and "OR" pull-down

If "AND" is specified, the "contains both" data of the phrase entered in the previous and next search boxes will be searched. If you specify "OR", the data that "contains" any of the words entered in the search boxes before and after is searched.
Example) X AND Y → "X and Y (including)"  X OR Z → "X or Z (including)"
If AND and OR searches are mixed, OR search has priority.
Example) X AND Y OR Z → X AND (Y OR Z)
If AND search and multiple OR search are mixed, OR search has priority.
Example) W AND X OR Y OR Z → W AND (X OR Y OR Z)

How to use the search filters

Use the "search filters" when you want to narrow down the search results, such as when there are too many search results. If you check each item, the search results will be narrowed down to only the data that includes that item.
The number in "()" after each item is the number of data that includes that item.

Search tips

When searching by author name, enter the first and last name separated by a space, such as "Taro Jidosha".