ログインしてください

文献・情報検索システム

日本語

ENGLISH

ヘルプ

ログインしてください

  • 詳細情報

Pollutant Emissions of a Blended Plug-In Hybrid Electric Vehicle during High-Power Cold Starts

書誌事項

カテゴリ(英)EC1 Testing and Emissions Measurement

翻訳

著者(英)1) Guikun Tan, 2) Yanfei Li, 3) Boyuan Wang, 4) Hongming Xu, 5) Shijin Shuai, 6) Zemin Eitan Liu
勤務先(英)1) Tsinghua Univeristy, 2) Tsinghua University, 3) Tsinghua University, 4) Tsinghua University, 5) Tsinghua University, 6) Tsinghua Univeristy
抄録(英)Plug-in hybrid electric vehicles (PHEVs) can effectively reduce fuel consumption and CO2 emissions, but the pollutant emission characteristics and engine operating conditions during high-power cold starts (HPCSs) are seldom reported. To fill this research gap, a blended PHEV was tested during worldwide light-duty test procedure (WLTC) and a new cycle was developed. The results in WLTC test indicated that two HPCSs occurred under charge depleting (CD) mode, while a convention cold start occurred under charge-sustaining (CS) mode. The particle number (PN) and NOx emissions during the HPCS were both higher than those of the conventional cold-start, but the CO and HC emissions were lower. The difference in emission characteristic of two kinds of cold starts was caused by the difference in engine operating conditions. During HPCSs, the engine speed and load increased dramatically to high level under the low temperature of coolant or three-way catalytic converter (TWC), while the engine idled for ~1 minute and then the engine speed and load increased slowly during the conventional cold start. The results in the developed cycle indicated that the PN emissions during HPCSs increased first and then decreased with the increasing coolant temperature. The PN emissions increased by 16% when the coolant temperature rose from ~20 ℃ to ~30 ℃, and the PN emissions decreases by 72% when the coolant temperature rose from~20 ℃ to ~60 ℃.

翻訳

検索について

閉じる

検索ボックスの使い方

検索条件は最大5件まで入力可能です。検索ボックスの数は右側の「+」「−」ボタンで増減させることができます。
一つの検索ボックス内に、複数の語句をスペース(全角/半角)区切りで入力した場合、入力した語句の“すべてを含む”データが検索されます(AND検索)。
例)X(スペース)Y →「XかつY(を含む)」

「AND」「OR」プルダウンの使い方

「AND」を指定すると、前後の検索ボックスに入力された語句の“双方を含む”データが検索されます。また、「OR」を指定すると、前後の検索ボックスに入力された語句の“いずれかを含む”データが検索されます。
例)X AND Y →「XかつY(を含む)」  X OR Z →「XまたはZ(を含む)」
AND検索とOR検索が混在する場合は、OR検索が優先されます。
例)X AND Y OR Z → X AND (Y OR Z)
AND検索と複数のOR検索が混在する場合も、OR検索が優先されます。
例)W AND X OR Y OR Z → W AND (X OR Y OR Z)

検索フィルタの使い方

検索結果の件数が多すぎる場合など、さらに絞り込みしたいときに「検索フィルタ」を使います。各項目にチェックを入れると、その項目が含まれるデータのみに検索結果が絞り込まれます。
各項目後ろの「()」内の数字は、その項目が含まれるデータの件数です。

検索のコツ

著者名で検索するときは、「自動車 太郎」のように、姓名をスペースで区切って入力してください。