Investigation of the Effect of Pre-Chamber Specifications on Pre-Chamber Jet Combustion Characteristics Using an Optically Accessible Engine
- 提供方法
- 本サイト上にてダウンロード・閲覧可
- 形態
- 価格
- 一般価格(税込)：￥1,100 会員価格(税込)：￥880
- 文献番号
- 20239501
- 文献・情報種別
- SETC
No.2023-01-1801
- 掲載ページ
- 1-9(Total 9 p)
- 発行年月
- 2023年 10月
- 出版社
- (公社)自動車技術会 & SAE
- 言語
- 英語
- イベント
- Small Powertrains and Energy Systems Technology Conference 2023
書誌事項
| 著者（英） | 1) Takaaki Chiba, 2) Taisei UGAJIN, 3) Kaito Shinozaki, 4) Ryota Tahara, 5) Ryo Sugiyama, 6) Akira Iijima |
|---|---|
| 勤務先（英） | 1) Nihon University Graduate School, 2) Nihon University Graduate School, 3) Nihon University Graduate School, 4) Nihon University Graduate School, 5) Nihon University Graduate School, 6) Nihon University |
| 抄録（英） | This study focused on a lean-burn regime using a pre-chamber for improving the efficiency of internal combustion engines. Combustion images were visualized using a two-stroke, single-cylinder, optically accessible engine fitted with a cylindrical pre-chamber. The L/D ratio of the pre-chamber length (L) to its diameter (D) and the diameter of the pre-chamber orifice were varied as parameters. Combustion characteristics were analyzed based on the visualized jet flow configuration and combustion chamber pressure measurements. The results revealed that the combustion duration tended to be longer with a smaller L/D ratio and that the coefficient of variation (COV) of the indicated mean effective pressure (IMEP) was smaller and more stable. With a smaller orifice diameter, the jet velocity was faster, and the flame development duration was shorter, but the combustion duration was longer; IMEP tended to be lower, but the COV of IMEP was smaller. 翻訳 |
