A PN-Measurement System for Small Engine Applications
- 提供方法
- 本サイト上にてダウンロード・閲覧可
- 形態
- 価格
- 一般価格(税込)：￥1,100 会員価格(税込)：￥880
- 文献番号
- 20239509
- 文献・情報種別
- SETC
No.2023-01-1809
- 掲載ページ
- 1-7(Total 7 p)
- 発行年月
- 2023年 10月
- 出版社
- (公社)自動車技術会 & SAE
- 言語
- 英語
- イベント
- Small Powertrains and Energy Systems Technology Conference 2023
書誌事項
| 著者（英） | 1) Sebastian Schurl, 2) Martin Kupper, 3) Helmut Krasa, 4) Stephan Schmidt, 5) Stefan Sturm, 6) Andreas Heidinger |
|---|---|
| 勤務先（英） | 1) Graz University of Technology, 2) Graz University of Technology, 3) Graz University of Technology, 4) Graz University of Technology, 5) Graz University of Technology, 6) Graz University of Technology |
| 抄録（英） | Particulates are among the most harmful emission components of internal combustion engines (ICE)). Thus, emission limits have been widely introduced, e.g., for light- and heavy-duty vehicles. Although there are still engine applications without particulate limitations, the measurement of particulate mass (PM) and particulate number (PN) emissions is therefore of special interest for the development and operation of ICE. For this purpose, a measurement system for PN consisting of a custom-built sample conditioning and dilution system, and a TSI 3790-A10 condensation particle counter (CPC) as particle number counter (PNC) was designed and built. In this work, we present the conditioning and dilution system, the operational parameters, and results from the particle concentration reduction factor (PCRF) calibration. The sampling system was developed in accordance with the current global technical regulations (GTR15) and consists of a heated sampling probe, up to three dilution stages and a catalytic stripper for volatile particle removal (VPR). In order to be able to cover a variety of engines and provide the wide measurement range of eleven orders of magnitude, further dilution stages were implemented in the system. With the help of a variable mixing chamber dilution and an additional ejector diluter, PCRFs between 1:200 and 1:5000 can be used. The primary dilution stage consists of an ejector-diluter calibrated to a dilution ratio of 1:23,4 at 20 °C. The catalytic stripper arranged in the system consists of an oxidation catalyst and a sulphate trap. A PCRF calibration was done using a Jing miniCAST as a particle source, producing a polydisperse combustion aerosol which is passed through a dilution bridge, a VPR and a differential mobility analyzer (DMA). The DMA allows to select monodisperse modes according to mobility diameters of the particles. The PCRF was measured by a reference CPC (TSI 3775). Calibrations were done at 15, 23, 41, 60 and 100 nm for the eight different dilutions, resulting in 40 measurements. 翻訳 |
