ローラチェーンにおける内プレートの疲労強度に及ぼすブシュ圧入の影響
Effect of Press Fitting Between Bush and Inner Plate Upon the Fatigue Strength of Roller Chain
- 提供方法
- 他サイトにて提供・販売
- 入手方法の確認はこちら
- 文献番号
- 20224043
- 文献・情報種別
- 自動車技術会論文集
Vol.53 No.1
- 掲載ページ
- 119-125(Total 7 p)
- 発行年月
- 2022年 1月
- 出版社
- (公社)自動車技術会
- 言語
- 日本語
書誌事項
カテゴリ | 研究論文 |
---|---|
カテゴリ(英) | ResearchPaper 翻訳 |
著者 | 1) 斉藤 亮一, 2) 野田 尚昭, 3) 佐野 義一, 4) 宮城 新, 5) 鳥取 尚徳 |
著者(英) | 1) Ryoichi Saito, 2) Nao-Aki Noda, 3) Yoshikazu Sano, 4) Arata Miyagi, 5) Hisanori Tottori |
勤務先 | 1) センクシアチェン, 2) 九州工業大学, 3) 九州工業大学, 4) 九州工業大学, 5) 九州工業大学 |
抄録 | ブシュと内プレートの圧入率を変化させてローラーチェーンの疲労強度を評価した.両端部を穴あけされた内プレートにブシュを圧入嵌合した試験片を用いた.また耐久線図による強度評価を行うため,FEM解析を行った.試験の結果,圧入率δ/D>1.8×10-3は,δ/D=0よりも疲労限度が向上することがわかった. |
抄録(英) | In this paper, the fatigue strength of the roller chain is investigated by varying the press-fitting ratio between the bush and the inner plate. A single plate specimen with two bushes press-fitted into two holes at the plate ends is used in the fatigue test. The FEM analysis is performed to obtain the stress amplitude and the average stress on the fatigue endurance limit diagram. The results show that the fatigue strength can be improved under suitable press-fitting ratio δ/D>1.8×10-3 compared to the fatigue strength at the press-fitting ratio δ/D=0. 翻訳 |