ピッチ差付きボルト・ナット締結体のユンカー緩み試験による耐緩み性の評価
Investigation of loosening resistance based on Junker loosening test of bolt nut connections with pitch differences
- 提供方法
- 他サイトにて提供・販売
- 入手方法の確認はこちら
- 文献番号
- 20224176
- 文献・情報種別
- 自動車技術会論文集
Vol.53 No.2
- 掲載ページ
- 410-417(Total 8 p)
- 発行年月
- 2022年 3月
- 出版社
- (公社)自動車技術会
- 言語
- 日本語
書誌事項
カテゴリ | 研究論文 |
---|---|
カテゴリ(英) | ResearchPaper 翻訳 |
著者 | 1) 野田 尚昭, 2) 王 彪, 3) 佐野 義一, 4) 川野 凌, 5) 劉 溪, 6) 乾 湧人, 7) 高瀬 康 |
著者(英) | 1) Nao-Aki Noda, 2) Biao Wang, 3) Yoshikazu Sano, 4) Ryo Kawano, 5) Xi Liu, 6) Yuto Inui, 7) Yasushi Takase |
勤務先 | 1) 九州工業大学, 2) 九州工業大学, 3) 九州工業大学, 4) 九州工業大学, 5) 九州工業大学, 6) 九州工業大学, 7) 九州工業大学 |
抄録 | 本論文では,ユンカー緩み試験における緩み過程を,ナット締付力の繰返数による変化として捉え,これを3次元FEM解析により求める.その結果をユンカー緩み試験で得られた結果と比較して,ピッチ差付きナットの耐緩み性能を評価し,そのメカニズムにも言及する. |
抄録(英) | In our previous studies, a bolt-nut connection with slight pitch difference was considered towards realizing anti-loosening performance and high fatigue strength through axisymmetric finite element method (FEM) and experiment. Also by applying three-dimensional FEM, the nut tightening/untightening process was analyzed to confirm anti-loosening performance indirectly. In this study, Junker's type loosening experiment based on DIN standard is used to confirm the anti-loosening performance directly. The results suggest that suitable pitch difference may provide good anti-loosening performance. The 3D FEM simulation is in good agreement with the experiment. The anti-loosening of the pitch difference nut is discussed by comparing the loosening of the normal nut. 翻訳 |