自動車内燃エンジンのピストンリング-シリンダシステムに対する数値解析
Numerical Analysis of the System Piston-Ring-Cylinder of an Automotive IC Engine
- 提供方法
- 版元よりダウンロードリンクを連絡
- 形態
- 価格
- 一般価格(税込)：￥6,600 会員価格(税込)：￥5,280
- 文献番号
- 20201989
- 文献・情報種別
- SAE Paper
No.2020-01-2160
- 掲載ページ
- 1-11(Total 11 p)
- 発行年月
- 2020年 9月
- 出版社
- SAE International
- 言語
- 英語
書誌事項
| 著者（英） | 1) Andrzej Wolff |
|---|---|
| 勤務先（英） | 1) Warsaw University of Technology |
| 抄録 | 最初に著者が開発したピストンリング-シリンダシステムの簡潔なモデル(粘性オイル流れモデル等)を説明する．次に実験検証された数学モデルとソフトウェアについて述べる．本モデルは遮蔽リングからのガス漏れやピストンリングの潤滑条件・オイル消費の評価，シリンダライナの摩耗部位の明確化等を行うことができ，本システムの設計最適化にも有用である． |
| 抄録（英） | A set of piston rings is used to form a dynamic gas seal between the piston and cylinder wall. Many physical phenomena are associated with the operation of the system piston-ring-cylinder (PRC), such as: inter-ring gas dynamics for the labyrinth seal, hydrodynamic lubrication and mixed friction in gaps between the rings and cylinder liner, oil flow and distribution of lubricant along the liner, twist motion of rings, liner temperature influence on the oil viscosity. The first part of the paper presents a comprehensive model of the PRC system developed by the author. Among own models it includes several models taken from literature, like: a model of viscous oil flow between rough gap surfaces formulated by Patir & Cheng and an elastic contact model of Greenwood & Tripp. The main parts of developed mathematical model and software have been experimentally verified during a research period of the author at the marine engine designing centre ”Wärtsilä” in Switzerland. A relatively good qualitative and quantitative compatibility between the experimental measurements and calculated results has been achieved. In contrast to the previous papers of the author concerning the piston ring pack operation of IC engines, a part of new calculation results for an automotive internal combustion engine have been presented. These results include basic physical quantities associated with gas and oil flow processes in the PRC system for the analyzed engine. The developed simulation model can be utilized for: evaluation of gas leakage through the sealing ring set, prediction of lubrication conditions of piston rings and oil consumption, defining areas of the possible cylinder liner wear and profile changes of piston rings sliding surfaces, and thus can be useful for optimization of the PRC system design. 翻訳 |
