Interior Floor Engineering: Acoustic vs. Compression Performance
- 提供方法
- 版元よりダウンロードリンクを連絡
- 形態
- 価格
- 一般価格(税込):¥6,600 会員価格(税込):¥5,280
- 文献・情報種別
- SAE Paper
No.2021-01-1129
- 掲載ページ
- 1-12(Total 12 p)
- 発行年月
- 2021年 8月
- 出版社
- SAE International
- 言語
- 英語
- イベント
- Noise and Vibration Conference & Exhibition
書誌事項
著者(英) | 1) Andrea Frey, 2) Ben Koeske, 3) Wanlu Li, 4) Brandon Wichmann |
---|---|
勤務先(英) | 1) Autoneum North America Inc., 2) Autoneum North America Inc., 3) Autoneum North America Inc., 4) Autoneum North America Inc. |
抄録(英) | The interior floor of a vehicle cabin occupies a significant amount of surface area in proportion to the cabin as a whole, and as such provides a prime opportunity for acoustic treatment. Generally speaking, floor materials must be relatively limp to achieve high acoustic performance. However, the tactile quality of a vehicle floor is very important. The end customer has an expectation for how it should feel to step onto the floor of a vehicle: a carpet should “give” slightly, but not compress fully, under pressure. A carpet that is too stiff or not stiff enough may be perceived as indicative of low quality. Thus, acoustic targets and stiffness targets tend to be at odds. A vehicle interior floor is a trim component which consists of different layers and which can have different pile-up configurations. Such a pile-up typically consists of a soft layer, called a decoupler, and a top layer. Previous work has shown how CAE tools can predict part-level compression behavior during design and work in conjunction with established tools for NVH performance prediction. This paper will examine the acoustic effects of compression behavior of floor materials as installed in the vehicle by means of several vehicle-level acoustic tests, both static and dynamic. 翻訳 |