ログインしてください

文献・情報検索システム

日本語

ENGLISH

ヘルプ

ログインしてください

  • 詳細情報

Combustion, Performance and Emission Characteristics of Early Direct Injection Compression Ignition Engine with Varying Oxy Hydrogen Gas Concentration

書誌事項

著者(英)1) Nikhil Aniruddha Bhave, 2) Mahendra Gupta PhD, 3) Sandeep Joshi PhD
勤務先(英)1) Shri Ramdeobaba College Of Engineering, 2) Shri Ramdeobaba College Of Engineering, 3) Shri Ramdeobaba College Of Engineering
抄録(英)Early Direct Injection Homogeneous Charge Compression Ignition is one of the clean combustion technologies which reduces the oxides of nitrogen and soot emissions significantly. However, this strategy suffered from drawbacks of fuel spray impingement on cylinder walls, excessive carbon monoxide, and unburnt hydrocarbon emissions, and lower thermal efficiency than conventional diesel combustion in CI engines. A novel attempt has been made in this experimental research work to address the above-said issues by injection of oxy hydrogen gas as a fuel additive to diesel in stationary Compression Ignition engine. This gas was injected into the intake manifold where it premixes with the incoming air. Experiments were conducted at a constant rpm of 1500 and load was varied from 0 to 75%. The diesel was injected by common rail direct injector 45 Before Top Dead Center which ensured an almost homogenous mixture of air, oxy hydrogen gas, and diesel. Due to the presence of hydrogen, the increased flame speed resulted in an increase in peak pressure and heat release rates. This enhanced the Brake Power and Brake Thermal Efficiency. CO and HC emissions were reduced due to oxy hydrogen gas addition compared to the early injection strategy. HC emissions decreased for a lower oxy hydrogen gas flow rate of 200 ml/min. However, smoke emissions were increased with oxy hydrogen gas induction due to an increase in BSFC. Oxides of Nitrogen reduced with oxy hydrogen gas addition by almost 44.13%.

翻訳

検索について

閉じる

検索ボックスの使い方

検索条件は最大5件まで入力可能です。検索ボックスの数は右側の「+」「−」ボタンで増減させることができます。
一つの検索ボックス内に、複数の語句をスペース(全角/半角)区切りで入力した場合、入力した語句の“すべてを含む”データが検索されます(AND検索)。
例)X(スペース)Y →「XかつY(を含む)」

「AND」「OR」プルダウンの使い方

「AND」を指定すると、前後の検索ボックスに入力された語句の“双方を含む”データが検索されます。また、「OR」を指定すると、前後の検索ボックスに入力された語句の“いずれかを含む”データが検索されます。
例)X AND Y →「XかつY(を含む)」  X OR Z →「XまたはZ(を含む)」
AND検索とOR検索が混在する場合は、OR検索が優先されます。
例)X AND Y OR Z → X AND (Y OR Z)
AND検索と複数のOR検索が混在する場合も、OR検索が優先されます。
例)W AND X OR Y OR Z → W AND (X OR Y OR Z)

検索フィルタの使い方

検索結果の件数が多すぎる場合など、さらに絞り込みしたいときに「検索フィルタ」を使います。各項目にチェックを入れると、その項目が含まれるデータのみに検索結果が絞り込まれます。
各項目後ろの「()」内の数字は、その項目が含まれるデータの件数です。

検索のコツ

著者名で検索するときは、「自動車 太郎」のように、姓名をスペースで区切って入力してください。