Design and Hardware in the Loop Testing of AEB Controllers
- 提供方法
- 版元よりダウンロードリンクを連絡
- 形態
- 価格
- 一般価格(税込)：￥6,600 会員価格(税込)：￥5,280
- 文献・情報種別
- SAE Paper
No.2022-01-0099
- 掲載ページ
- 1-9(Total 9 p)
- 発行年月
- 2022年 3月
- 出版社
- SAE International
- 言語
- 英語
- イベント
- WCX SAE World Congress Experience 2022
書誌事項
| 著者（英） | 1) Federico Alfatti, 2) Michele Garinei, 3) Claudio Annicchiarico, 4) Renzo Capitani |
|---|---|
| 勤務先（英） | 1) Meccanica 42 S.R.L., 2) Meccanica 42 S.R.L., 3) Meccanica 42 S.R.L., 4) Università degli Studi di Firenze |
| 抄録（英） | Current ADAS systems can improve vehicle safety directly influencing its dynamics, reducing the impact of human error while driving. These functionalities have a high impact on the complexity of each unit installed on the car, potentially increasing the development time. In this work, a Hardware in the Loop testing bench and methodology for Autonomous Emergency Braking system is presented, aiming to enable a faster system development process. A commercial production brake by wire unit has been installed on a real-time driving simulator. The AEB functionality of the unit is activable in real-time during the simulation, by the means of a customizable control strategy. Two different AEB controllers have been implemented: the first one reproduces the unit stock functionality, while the second computes the requested deceleration using a PID control strategy. The two controllers have been tested in standardized EuroNCAP Car-to-Car Rear (CCR) collision scenario, implemented on the static simulator. The performances are then compared in terms of time to collision threshold necessary to avoid the impact, deceleration request and jerk, and vehicle-obstacle distance. The proposed methodology highlights the role of the static simulator as a development tool, allowing complete and immersive testing of both hardware and control strategies, greatly reducing the development time. 翻訳 |
