Modelling of Off-Road Truck Tire-Rim Slip Using Finite Element Analysis
- 提供方法
- 版元よりダウンロードリンクを連絡
- 形態
- 価格
- 一般価格(税込):¥6,600 会員価格(税込):¥5,280
- 文献・情報種別
- SAE Paper
No.2022-01-0882
- 掲載ページ
- 1-7(Total 7 p)
- 発行年月
- 2022年 3月
- 出版社
- SAE International
- 言語
- 英語
- イベント
- WCX SAE World Congress Experience 2022
書誌事項
著者(英) | 1) William Collings, 2) Zeinab El-Sayegh, 3) Jing Ren, 4) Moustafa El-Gindy |
---|---|
勤務先(英) | 1) Ontario Tech University, 2) Ontario Tech University, 3) Ontario Tech University, 4) Ontario Tech University |
抄録(英) | Slip or relative rotation between the tire and rim is a significant concern for vehicle operation and wheel manufacturing since it leads to wheel imbalance and vibration as well as power losses. A slip situation typically occurs due to improper bead lubrication and mounting, irregularities in the bead seat, and extreme loading conditions with high torques and low tire pressures. Currently, there are relatively few published studies on the tire-rim interface, and they mainly focus on topics such as the mounting process, load transfer, and friction modelling. This leaves a gap to explore the measurement and variation of gross tire-rim slip under the dynamic conditions of a driven tire. In this paper, a previously developed and validated FEA truck tire model was modified to include a frictional contact surface between the tire and rim, and then the slip ratio between the tire and rim was measured under different operating conditions. The new model’s static behavior was compared to the previously validated model with the fixed tire-rim connection, then the model parameters such as vertical load, inflation pressure, drawbar load, longitudinal wheel speed, and tire-rim friction were varied and their effects on the tire-rim slip of the driven truck tire were investigated. It was discovered that factors affecting the torque transmitted through the wheel, including the tire-rim friction, vertical load, and inflation pressure, had the most significant effect, while the longitudinal wheel speed had a minimal effect on the tire-rim slip. The findings of this research work will be useful for determining the tire-rim slip under various operating conditions. 翻訳 |